post

Fix The “Ethernet Doesn’t Have A Valid IP Configuration” Issue

If you can’t connect to the internet and you run the troubleshooter and all you see is the “Ethernet doesn’t have a valid IP configuration” then you are in trouble. But the good news for modern consumers such as yourself is that it is fixable. All you will need is some simple coding and it will be done.Disable AllJoyn Router Service in Windows 10

I know that the sound of coding does not ring any good bells but trust me when I say that it is not as difficult as you imagine. And besides, you will have to do this once so don’t worry yourself too much. And the best part is that it will be easy. It will be just like using the 192.168.2.1 on your home router. However, you should note that most routers have a default IP Address of 192.168.l.l, you can learn more about it from here 192.168.l.l.

How to fix “Ethernet doesn’t have a valid IP configuration” issue

Method 1: Disable and Enable the Network Interface Card

  1. To start, press Windows key + R. On the Run window type NCPA.CPL and hit ENTER.
  2. Open the NIC that is having the said issue. Whether it’s your WiFi or LAN, right-click on it.
  3. Choose Disable and wait for a minute or two.
  4. Now right-click on the NIC again and choose Enable this time.
  5. It should now receive a new and refreshed IP address.
  6. Try your internet if it is finally working again.
  7. If it still does not fix it, open the Command window by pressing Windows key + R and type CMD then hit ENTER.
  8. Now on the Command window, type ipconfig /release then hit ENTER
  9. Next is to type ipconfig /flushdns then hit ENTER again.
  10. The type ipconfig /renew then ENTER.
  11. Restart the PC for the changes to take effect. It should now work and give you a new IP address configuration.

Method 2: Reset Winsock

  1. If you are using a Windows 8, 8.1, and 10, just hover your mouse to the Windows logo on the far left of the taskbar and right-click to show Command Prompt (Admin) and then left-click on it.
  2. On the Command window, type the netsh winsock reset then hit ENTER.
  3. Now type the netsh int ip reset then hit ENTER again.
  4. Restart your PC for the changes to take effect. It should now fix your “Ethernet doesn’t have a valid IP configuration” issue.

Method 3: Update Driver

  1. Go to your Device Manager by going to Control Panel. Or launch the Run window by pressing Windows key + R and type devmgmt.msc and press ENTER.
  2. On the list of installed hardware and drivers, go to Network Adapters and look for the one that is getting the issue.
  3. Right-click on the network adapter and hit Update Driver Software and lead it to where you saved the new driver.
  4. If you do not know what driver to use, you can use third-party software to identify it for you. You can try the Snappy Driver Installer and use the lite version.
  5. If you use the Snappy driver installer, instead of Update Driver Software, Click Uninstall driver and then restart the PC.
  6. Run the Snappy and it will get you the latest driver available for your hardware.
  7. Install the driver and once done, restart the PC again.
  8. Your internet should now be working properly.

Method 4: Reset Network Adapter Settings

  1. Press the Windows key + R to open the Run window.
  2. Type in the NCPA.CPL and press ENTER.
  3. Double-click the Network Adapter that is experiencing the issue.
  4. On the new window, scroll down and look for the TCP/IPv4 and double-click on it again or choose Properties.
  5. Make sure the Obtain IP Address Automatically and the Obtain DNS server address automatically is ticked.
  6. If it is already ticked, click OK at the bottom. Then click OK again to close the other window.
  7. It should now obtain a new IP address.
  8. Check the internet by opening your web browser and visiting a website such as YouTube.

In Conclusion

Any of this method should fix your internet connection problem. If in any case that any of this won’t work, try restarting your router and modem then try again with your web browser. If it still won’t work, this time, reset the router and modem by pressing the reset button at the back of the router and modem.

If still nothing works, it could be that your ISP is the cause of the issue. This should be obvious if you try to connect other devices such as smartphones and you still cannot access the internet. This is the right time to call the customer service and inquire about the internet issue that you are having.

And finally, try to follow all the steps indicated here as exactly as it says. This way, you would have a higher chance of fixing the issue as soon as possible.

If you have other questions that you want to ask our team, feel free to leave a message in the comment section. We will try to answer all of your queries as soon as possible. Also, if you know people who experience the same issue with their internet connection, share this article with them so that they will be able to fix it as well.

post

This Infographic Explains Modern Consumer Behaviour in 2017

Source: bigcommerce.com

post

192.168.2.1 Default IP Address for Some Home Network Routers

For using the internet provided by an internet service provider, we need to use a router. There are numerous routers manufactured by various companies such as D-Link, TP-Link, Netgear, etc. Each router is associated with an IP address which is used to access the administrator dashboard of that router. From here, one can configure or manage that router.

192.168.2.1 is one such private IPv4 network address which is associated with some home-use broadband router. To solve any error or to manage the router, one can go to ‘192.168.2.1’ this IP address using any web browser and make the necessary changes.

How to Setup Your Router on 192.168.2.1

router login address

Here, we are going to discuss how to set up a router which is associated to ‘192.168.2.1’ this IP address. So let’s get started.

Step 1- Turn on your router and connect it to a device by using a wireless connection. You can also use a network cable to connect your PC/laptop to your router.

Step 2- Once connected, open a web browser on the device which you have connected to your router. Here, type ‘192.168.2.1’ in the search bar and hit ‘Enter.’

Step 3- You will be directed to the setup page of your router. You will have to log in using the default username and password which is ‘admin.’ Once you log in successfully, a setup wizard will be displayed on your screen using which you set your router step by step.

Step 4- You have to set all the preferences according to your usage. Also, you can modify the password and the SSID of your router from here. You must keep saving the changes made in each category otherwise the changes which you have made will be undone.

Step 5- Once you are done with all the changes which you had to make, and when your router is all set, you must restart your router to apply all the changes which you have made.

Once you change the password of your router, you will have to reconnect your device to your router using the new password which you have set.

Important Note: If you found that this IP Adress is not working, then open 192.168.1.1 or 192.168.l.l instead. This is the default router admin login IP for all Wireless Routers.

Why 192.168.2.1 is not working on your computer?

If you are not able to access ‘192.168.2.1’ this IP address, there might be a few reasons which are listed below:

1. Your router is not turned on or is not ready to use. Be patient till the router is completely turned on and is ready to use.

2. Your router is not associated to ‘192.168.2.1’, and you have mistaken it with some other IP address. To know the IP address associated with your router, open CMD and type ‘ipconfig/all‘ and know the correct IP address. Or you can use the command ‘ping 192.168.2.1’ and if it displays the message ‘Timeout’ then it means that you cannot connect to that IP address through your router.

3. If you are still unable to access ‘192.168.2.1’ then, the network port is not specified, or there must be a firewall.

4. Ensure that all the required connections are made properly. Especially the power and the ethernet cable. If they are not connected properly, try putting them back in place.

5. If the problem is still not solved, disconnect all the connections of your router and turn it off. Then, reconnect the connections and restart your router. This should solve the problem.

6. If you are still facing difficulty in accessing the configuration page then, disconnect the device you are using from the router. Then, reconnect your device to the router and try accessing the configuration page again.

Can you assign ‘192.168.2.1’ this IP address to a router?

Most of the routers are assigned their IP addresses by using Dynamic Host Configuration Protocol (DHCP). This means that you can reassign a different IP address to your router. But, you may face connection issues if the network’s router is not configured correspondingly.

Each router is configured with a range of private addresses. Hence, you can find out the range of your router’s IP addresses and check whether ‘192.168.2.1’ is present in the list or not. If it is, you can assign ‘192.168.2.1’ this IP address to your router.

CONCLUSION:

This is all you need to know about ‘192.168.2.1’ this IP address. If you still have queries regarding this IP address, then please let us know in the comments section below.